D49/C2-LWW-WG-AL
Product Info
Item code
NASTER D49 / D49/C2-LWW-WG-AL
Category
Downlight
Environments
façades and architectural works, hallway, industrial areas, railway areas, subway areas
Mounting type
frame
Mounting note
In case of installation of a row of more fixtures the distance between the two adjacent holes (short side) must not be less than 80 mm. The dimensions of the false-ceiling hole cut out are indicated in the Chart. See instructions delivered with the fixtures.
Body
Corrosion resistant extruded aluminium body. Corrosion resistant die-cast aluminium end caps.
Painting
Polyester powder coating, with a pluri-processed against corrosion (passed the exposure of over 1500 hours in a saline mist environment).
Screws
AISI 304 stainless steel screws.
Seals
Silicone Rubber.
Standard Colour
AL | aluminium grey
Option colors
GR | graphite satin finish
Dimensions
Total device width (mm)
90
Total device length (mm)
650
Optical System
Diffuser
Tempered safety glass - 8 mm thickness, mechanical and thermal shock resistant.
Optical System
Optical system with PMMA lenses.
Beam
narrow
Emission
direct
Adjustable
No
Photometrics
Sources
MacAdam
Step 3
Output Flux
1350 lm
Source type
LED
System power
14W
Temperature Colour
3000K CRI>80
Electrical
Ballast type
ON-OFF.
Frequency
50-60Hz
Lifetime
50.000h L80B50 (Ta=25°C)
Line input
Internal looping facility with two H07RN-F, rubber cable section 2x1,5mm² maximum allowed current 6A. Pre-wired and tested with resin sealed watertight H07RN-F cables (for a fast and secure connection to the main power line, use ACS/CR1 connector or similar.
Mounting ballast type
Integral
Voltage
220-240V
Separate ignition
No
Emergency 1E
No
Emergency 3E
No
Optional Accessories
Optical
D49/2-HL
NASTER honeycomb louver for Wall Grazing optic L=650mm.