D34/SD-R

  • Download
  • Request Information

Product Info

Item code
SEGNALATORI D34 / D34/SD-R
Category
Signal lights, Signal lights
Environments
façades and architectural works, industrial areas
Mounting type
F3/4" Gas
Body
Corrosion resistant die-cast aluminium body.
Painting
Powder painting after passivation.
Screws
AISI 304 stainless steel screws.
Seals
Silicone Rubber.
Glow wire resistant
850°C
Standard Colour
R | red

Dimensions

Total device height (mm)
200
Weight (kg)
0.83
Volume piece packed (m³)
7

Optical System

Optical System
Unbreakable polycarbonate anti UV globe.
Beam
diffuse
Emission
radial
Adjustable
No

Photometrics

Sources

Lamp Socket
Output Flux
Source
Source power
Nominal Flux
Source type
System power
Lamp Socket
E27
Output Flux
840 lm
Source
A60
Source power
Yes
Nominal Flux
Yes
Source type
normal halogen Ø60x105mm
System power
52W
Lamp Socket
E27
Output Flux
600 lm
Source
Krypton
Source power
Yes
Nominal Flux
Yes
Source type
krypton incandescent Ø60x105mm
System power
75W

Electrical

Voltage
230V
Separate ignition
No
Emergency 1E
No
Emergency 3E
No

Optional Accessories

Electrical

ACS/CCP

For models: D34/E27 - D34/LED. Twilight photoelectric cell. Electronic circuit. Automatic switching on and off (dusk to dawn). 230/240V - 50/60Hz power supply. 16A maximum current. =10.000 cycles working life at max loading. 2 lux minimum switching threshold. Continuous control range from 2 to 100 lux. Excluded-time delay for over-ride switching approximately 30". Temperature range - 30°C + 60°C. Insensitive to transient over-voltage conditions.

D34/CMA

For models D34/E27. Automatic change-over device for stand-by lamp. Automatic change over when operating lamp fails. Automatic reinstatement when failed lamp is replaced. 110/230V ±10% power supply. 50/60Hz frequency. Maximum allowed power at 230V:60W min 75W max. Maximum allowed power at 110V:40W min 60W max. 10 operation working life. Temperature range - 40°C + 60°C. Cable gland entries for Ø7÷12mm cable.

D34/QL4

For models D34/E27. Centralized control panels 4 type sdd. Panel door double lock with key. 230V-50Hz ±10% power supply. Automatic mains switch 16A/10KA-230/400V type C (IEC898). Automatic switching on by CCP twilight cell. Green "mains on" pilot lamp. Contactor maximum load at 230V-2,2KW. Photoelectric cell exclusion and circuit test by bipolar switch 16A-250V. Automatic change-over - CMA system. Red "failed" pilot lamp. Available telealarm for failed lamp and photocell out of service. Connections by single core flexible wires, type N07V-K CEI 20-22 II. Numerical marking. N entries (number of signals) +3 (line-photocell-telealarm) for Ø7÷12mm cable, H07RN-F type.